Print Fail #2
- Greggers
- Dec 11, 2020
- 1 min read
Updated: Dec 13, 2020
Tried to use the experimental feature in Cura called “Fuzzy Skin” to try and give a self made model some texture. Didn’t quit turn out like expected and had to much support for the print causing the tapering of the base to come off.
Filament: GIANTARM PLA Filament 1.75mm - Black
Nozzle Temp: 200 degrees Celsius
Bed Temp: 60 degrees Celsius
Feature: Cura experimental feature called "Fuzzy Skin"
Comments